ultrasonic flaw detection
英 [ˌʌltrəˈsɒnɪk flɔː dɪˈtekʃn]
美 [ˌʌltrəˈsɑːnɪk flɔː dɪˈtekʃn]
网络 超声探伤; 超声波探伤
双语例句
- Analysis on the Causes of Nonconformity in Ultrasonic Flaw Detection of Low Alloy Medium Steel Plate and Countermeasures to be Taken
低合金中厚板探伤不合原因分析及对策 - Based on a data acquisition system for ultrasonic flaw detection, the paper describes the effect of interference on data acquisition systems and methods for the suppression of interference.
基于超声探伤的数据采集系统，提出了各种干扰对系统的影响及干扰的抑制方法。 - Analysis and Improvement Measures on the Causes of Nonconformity in Ultrasonic Flaw Detection for 60 kg High-Tensile Steel
60kg级高强度钢板探伤不合的原因分析及改进措施 - The Ultrasonic Flaw Detection for the Locomotive Wheelsets; Study on Multi Channel Ultrasonic Flaw Detection System Based on PC
提速机车轮对超声波探伤技术的研究基于PC机的多通道超声波探伤系统 - The utility model relates to a special test block for ultrasonic flaw detection, which belongs to the technical field of the ultrasonic flaw detection.
本实用新型涉及一种超声波探伤专用试块，涉及超声波探伤技术领域。 - Study on Multi Channel Ultrasonic Flaw Detection System Based on PC
基于PC机的多通道超声波探伤系统 - Analysis of Unqualified Cause of Thick Gauge High Strength Steel Plate in Ultrasonic Flaw Detection
厚规格高强度钢板探伤不合原因分析 - Development of Distributed Multi-Channel Ultrasonic Flaw Detection System
分布式多通道超声波探伤系统的研制 - The fact is fully testified by inspection of cracks revealed in the dissecting tests of three pieces of mold-lump scrapped by ultrasonic flaw detection.
对超声探伤报废的三块模块进行解剖试验，表露出的裂纹形貌完全说明了这点。 - The principle and its software of a B/ C scan image system which is developed by computer technique is described on the basis of ultrasonic flaw detection principles.
阐述了在超声探伤仪原理基础上，采用计算机技术研制的B/C扫描成像系统的原理及软件技术。 - The precautionary measures to prevent skirt from fracturing, by means of ultrasonic flaw detection technology, are discussed.
探讨了用超声波技术对运用机车柴油机钢顶铝裙活塞裙部裂损进行提前预防的措施和方法。 - Combining with the application in the worksite, this paper analyzes the ultrasonic flaw detection method for internal cracking of desuperheater header in boilers, also introduces the cause and the characteristics of distribution.
文章结合现场应用情况，对锅炉喷水减温器联箱内壁裂纹的超声波探伤方法进行了分析总结，并对裂纹产生的原因及分布特征进行了介绍。 - Grey mathematic's use in quantitative analysis of ultrasonic flaw detection
灰色数学在超声探伤定量分析中的应用 - Analysis of Couplants for Ultrasonic Flaw Detection on Rough Surfaces
粗糙表面超声探伤耦合剂的研究 - On the basis of analyzing the present conditions of the ultrasonic flaw detection work, the methods of flaw detection positioning for different parts of the axle are discussed.
在分析超声波探伤工作现状的基础上，对车轴各部位探伤定位的方法进行了探讨。 - Because of outside box of digital ultrasonic flaw detection is complex, we only study of digital part.
在数字化超声探伤仪外置盒的初期的研究中，由于系统的复杂性，只是对数字电路部分进行了研究和设计。 - This paper introduces the chip microprocessor achieves the problem of compensation for acoustic distance of the ultrasonic flaw detection in the ultrasonic flaw detection device.
主要介绍超声波探伤设备中，以单片机为核心实现超声波探伤中的声程补偿问题。 - Test surfaces are usually rough in ultrasonic flaw detection.
在超声探伤中，经常遇到测试面较粗糙。 - Virtual ultrasonic flaw detector is the combination of computer and ultrasonic flaw detection technique.
虚拟超声波探伤仪是计算机技术和超声波探伤技术的结合。 - A signal recognition method for ultrasonic flaw detection of austenitic stainless steel is introduced based on Fourier Transform and pattern recognition.
提出一种基于傅立叶变换和模式识别技术的奥氏体超声探伤信号的缺陷定性分类方法。 - Ultrasonic flaw detection technology combines the characteristic of ultrasonic with modern electronic technology as well as microcomputer technology.
超声波探伤技术是超声波特性与现代电子技术以及微电脑技术相结合的产物。 - Two methods for ultrasonic flaw detection of T-fillet welds with complete fusion are presented, i.e.Single straight probe and single tilting probe techniques.
介绍了全焊透T型角焊缝超声波探伤的两种方法：单直探头法和单斜探头法。 - Analysis of Precision of On-line Ultrasonic Flaw Detection of SAW Spiral Welded Pipe
螺旋埋弧焊管焊缝在线超声波自动探伤准确性分析 - We bring up the subject of outside box of digital ultrasonic flaw detection base on this tendency.
基于这种发展趋势，提出了数字化超声探伤外置盒这一新概念。 - Study on Outside Box of Digital Ultrasonic Flaw Detection
数字化超声探伤外置盒的研究 - Split-spectrum processing is used to enhance the ultrasonic flaw detection signals of coarse grained materials ( austenitic steel).
介绍用分离谱技术增强粗晶材料（臭氏体钢）超声检测信号信噪比。 - Through filtering denoising for ultrasonic flaw detection signal, electromagnetic interference and impact of point noise are inhibited effectively.
通过对缺陷超声检测回波信号进行去噪，有效抑制电磁干扰和点状噪声的影响。 - In this paper, we mainly used experiments and finite element method ( FEM) to research the laser ultrasonic flaw detection and provided some methods to investigate the location, size and some other information of the flaw.
本文从实验及有限元方法两方面展开对激光超声缺陷检测的研究，主要提出一些判断缺陷位置、尺寸等信息的方法。 - Based on ultrasonic flaw detection and software developing theory, we firstly analysised the requirement of software and designed the software system framework, and implemented the basic and advanced functions which composed the whole software system as following.
论文以超声探伤理论和软件开发为基础，在软件需求分析的基础上，进行了软件系统结构设计，实现了整体的基础功能、高级功能，完成了软件调试与优化。 - Ultrasonic Flaw Detection is one of the most commonly used in Non-destructive testing.
超声波探伤技术是无损检测诊断中应用最为广泛的方法之一。